Looking for Answers about this Product?
Customer Questions & Answers for
E3 Spark Plugs E3™ AUTOMOTIVE SPARK PLUGS
Produces up to 12% more power, reducing fuel consumption up to 13% while cutting harmful toxic emissions up to 58% By reducing carbon deposits, your engine will run cleaner and smoother and last lo
Questions & Answers for E3 Spark Plugs E3™ AUTOMOTIVE SPARK PLUGS
Question
is gaping required for these spark plugs?
asked 1 year, 9 months ago
on E3™ AUTOMOTIVE SPARK PLUGS
by
Anonymous
3 answers
Answers
answer 1
Yes, as was said all plugs require gapping. Even if they are "pre-gapped" from the manufacturer you never know what may happen durring shipping. The unique design requires the use of a "wire loop" style gapping tool rather than the common tapered disc or feeler gauge.
answered 1 year, 5 months ago
by
SirLDragon
- Valley City ND
answer 2
Gaping is required for all spark plugs.
answered 1 year, 6 months ago
by
Alexw
answer 3
It would vary by application Contact Jcw to find out for sure.
answered 1 year, 9 months ago
by
Cgroh89
Question
I bought these plugs for a 2002 GMC Sierra 5.3. Runs horrible --do I need Iridium plugs- are these plugs the wrong plug for this engine
asked 11 months ago
on E3™ AUTOMOTIVE SPARK PLUGS
by
tootsie1
2 answers
Answers
answer 1
take the negative battery off for an hour, reconnect, and after starting, immediately drive on the highway.
Top 500 Contributor
answered 8 months ago
by
ModelT
- Dallas
answer 2
You will need to check with your owners manual on Iridium plugs, Please go over the motor thoroughly and ensure that plug wires are snapped on the plugs all the way and that none of the plugs were dropped during installation. If you call (800) 603-4383 (7 days a week, 8am - 6pm) a Product information specialist will be happy to help guide you to diagnosing the problem.
answered 11 months ago
by
ProductSpecialistChris
Question
Which plug should I buy? E, X, or P? I have a 1998 Ford Explorer.
asked 7 months ago
on E3™ AUTOMOTIVE SPARK PLUGS
by
Anonymous
1 answer
Answers
answer 1
E If a 6 .
answered 1 month, 4 weeks ago
by
Anonymous
Question
can i get these spark plugs for a 2006 kawaski vulcan classic 1600?
asked 8 months ago
on E3™ AUTOMOTIVE SPARK PLUGS
by
lightenrod1
1 answer
Answers
answer 1
Yes if they are larger than 1/2" diameter.
Top 500 Contributor
answered 8 months ago
by
ModelT
- Dallas
Question
are these NON-resistor? If they aren't, then what brand/model is?
need non-resistor plugs for Plasma Capacitive Discharge Ignition to be installed in 2000 Taurus
asked 10 months ago
on E3™ AUTOMOTIVE SPARK PLUGS
by
Project23D
- Fort Benning
1 answer
Answers
answer 1
We will need some additional information in order to answer your question. Please call (800) 529-5003 and one of our product specialists will be happy to help.
answered 10 months ago
by
ProductSpecialistBrian
Question
WILL THIS BE A GOOD CHOICE FOR A 2006 YUKON SLT WITH A WHIPPEL SUPERCHARGER, HEADDERS , AND A K&N AIR HANDLER ?
asked 10 months ago
on E3™ AUTOMOTIVE SPARK PLUGS
by
EYEDR2010
- JACKSON, MS
1 answer
Answers
answer 1
Yes.
answered 10 months ago
by
ProductSpecialistBrian
Question
Would these make any big difference in a 1984 Chevrolet K10?
1984 Chevrolet K10 1/2 ton 4X4
asked 11 months ago
on E3™ AUTOMOTIVE SPARK PLUGS
by
BaxtertheTank
1 answer
Answers
answer 1
Yes these plugs will reduce your emission output
answered 11 months ago
by
ProductSpecialistChris
Question
Who is the maker of these G3 spark plugs
2004 GMC Sierra 4.8 294 motor
asked 1 year ago
on E3™ AUTOMOTIVE SPARK PLUGS
by
Anonymous
- La feria
1 answer
Answers
answer 1
PRYOTEK E3
answered 1 year ago
by
ProductSpecialistEmily
Question
E3.56 vs E3.68 for Toyota FJ Cruiser?
E3's own catalogue from 2006 or 2007 listed the E3.56 for the Toyota FJ Cruiser which is what Pep Boy's tried to sell me. I know they now list the E3.68 for it. What happened and which one does JC Whitney carry? The reach on the .56 is shorter than the .68 and I don't want the wrong plugs.
asked 1 year, 2 months ago
on E3™ AUTOMOTIVE SPARK PLUGS
by
Blackhillsdreams
- Florida
1 answer
Answers
answer 1
I just confirmed with JCWhitney via phone that they are selling the 3.68's, so they are the correct plugs. I've gone ahead and ordered them.
answered 1 year, 1 month ago
by
Blackhillsdreams
- Florida
Question
Are these available for Diesel engines?
asked 1 year, 3 months ago
on E3™ AUTOMOTIVE SPARK PLUGS
by
Chief01
- OK
1 answer
Answers
answer 1
No they are not because diesel engines use glow plugs not spark plugs
answered 1 year, 3 months ago
by
jeepster85
